KT-M120 12000lbs Vehicle Lift
*Concrete thickness must be at least 5.9” (150 MM) with a 3000 PSI rating. Failure to install this lift on the proper concrete, could result in serious injury or death! It is the customer’s responsibility to verify concrete thickness and strength before purchase and installation.
- 12000lbs(5500KG) lifting capacity
- CE Approved and Certified. It has adopted the 115% dynamic loading capacity standard and was 150% static loading capacity tested
- Manual safety release from two sides
- Symmetric arms
- Dual Hydraulic Chain-Drive Cylinders
- Rubber pad door opening protection
- Comes with extended support adaptor sets of + 30 mm and + 120 mm
- Overhead safety shutoff bar
- Feet-protection safety guardrails with tools box
- High-quality hydraulic system with 220V/60HZ/1PH or 110V/ 60HZ/ 1PH (Optional)
| Lifting Capacity | 12000 lbs. (5500KG ) |
| Max. Lifting Height | 70.75″ / 1800mm |
| Min. Height | 4.25″ / 110mm |
| Height Overall | 166.75″ / 4235mm |
| Width Overall | 165.5″ / 4204mm |
| Outside Columns | 151.25″ / 3840mm |
| Inside Columns | 130″ / 3390mm |
| Drive Thru Clearance | 117.75″ / 2990mm |
| Motor | 220VAC/60HZ/1PH |
| Net Weight | 1653lbs/750K |
SHIPPING POLICY: Please read carefully
- Freight shipping ONLY within the lower 48 states.
- Two post lift products require a shipping fee ($590/piece) to commercial addresses only. Remote areas may be charged extra for shipping. Please confirm before delivery.
- Shipping carrier may charge extra to residential Delivery.
- THE BUYER IS RESPONSIBLE FOR UNLOADING FROM THE TRUCK.
- Customer should consider Forklift and unloading dock service.
- The buyer should be also responsible for any re-delivery charges.
- Buyers should inspect delivered the products carefully before signing Bill of Lading or Delivery Receipt at the time of delivery. Buyer satisfaction is assumed if no damages are noted on the delivery receipt.
Reviews
There are no reviews yet.